Table of Contents
Advertisement
5
8.2.4.4 SIDE MASK LEVEL
To configure sidemask's R, G, B level (To adjust the values, input signal is required).
No.
1
R MASK LEVEL
2
G MASK LEVEL
3
B MASK LEVEL
8.2.4.5 FINAL SET UP
To reset each memory value sto factory default values. Factory command is "FST".
When the configuration is set to <NO> and the [SET] key is pressed, no action is taken
and the menu returns to previous screen.
When the configuration is set to <YES> and the [SET] key is pressed for 5 seconds, the
reset action executes.
Be sure to disconnect and connect the Power cord after the FINAL SETUP.
When replacing the MAIN ASSY, the FINAL SETUP is required.
5
6
Display
Adjust Side Mask R (Initial value : 80, Adjustable range: 000-255)
Adjust Side Mask G (Initial value : 80, Adjustable range: 000-255)
Adjust Side Mask B (Initial value : 80, Adjustable range: 000-255)
PDP-6071PU
6
7
Content
7
8
A
B
RS232C
RSL
GSL
BSL
C
D
E
F
163
8
Advertisement
Table of Contents
