Table of Contents
Advertisement
5
8.2.2.11 COMBI MASK SETUP (+)
• This menu set the COMBI MASK and the drive sequence at COMBI MASK state.
• The MASK indication sequence can be changed among 48V, 50V, 60V, 72V, 75V, 60P, and 70P, using the Right or
Left key. The selected sequence and the ABL/WB table are retained until the mask is turned off.
• 48 V and 60 P are deleted from the sequence, and represented by 50 V and 60 V, respectively. The ABL/WB table is
changed to the PC table.
5
6
7 Key operation
<DOWN> : Shifting to PANEL INFORMATION
<UP>
<SET>
7 Key operation
<DOWN> : Shifting to the next MASK
<UP>
<RIGHT> : Changing MASK sequence (+)
<LEFT>
<SET>
PDP-6071PU
6
7
: Shifting to PATTEN MASK SETUP
(+)
: Shifting to the next nested layer
: Shifting to the previous MASK
: Changing MASK sequence (-)
: Determining the adjustment/setting
value and shifting to the upper layer
7
8
A
B
C
D
E
F
159
8
Advertisement
Table of Contents
