Checking The Embroidery Motif Size And Position - Bernina 500 User Manual

Checking the embroidery motif size and position

It can be checked whether or not the embroidery motif matches the designated position/location on the
fabric. Points which are beyond the embroidery hoop are not traveled to.
> Select the embroidery motif.
> Touch the icon «i»-Dialog.
> Touch the icon «Check the embroidery motif size» or
check
> push the button «Check the embroidery motif size».
– The embroidery hoop travels all the way until the needle is at the position as it is indicated in the
display.
> Touch the icon «Corner top left» to select the top left corner of the embroidery motif.
– The embroidery hoop travels all the way until the needle is at the position as it is indicated in the
display.
> Touch the icon «Corner top right» to select the top right corner of the embroidery motif.
– The embroidery hoop travels all the way until the needle is at the position as it is indicated in the
display.
> Touch the icon «Corner bottom left» to select the bottom left corner of the embroidery motif.
– The embroidery hoop travels all the way until the needle is at the position as it is indicated in the
display.
> Touch the icon «Corner bottom right» to select the bottom right corner of the embroidery motif.
– The embroidery hoop travels all the way until the needle is at the position as it is indicated in the
display. If the embroidery motif hasn't been positioned correctly yet, the position can be altered via
the «Upper/Lower Multifunctional knobs» and the complete embroidery positions can be checked
again.
> Touch the icon «Center of the embroidery motif» or
> push the button «Center of the embroidery motif» to bring the needle to the center of the embroidery
motif.
> Turn the «Upper Multifunctional knob» to move the embroidery motif horizontally.
> Turn the «Lower Multifunctional knob» to move the embroidery motif vertically.
Creative embroidering
73