Pioneer DMH-ZF8550BT Operation Manual page 70

1
Find the device number (12 alphanumeric characters) on the label on the
packaging of this product or on the product itself.
2
Access the following website and follow the on-screen instructions to configure
the desired firmware.
https://www.idatalinkmaestro.com/en
NOTE
When the serial number input is required, input the device number of this product.
3
Install the vehicle/head unit-specific firmware on your iDatalink Maestro module.
4
Connect this product to the iDatalink Maestro and install this product to the
vehicle.
The iDatalink function will be active.
NOTES
• For details on installing the firmware, refer to iDatalink Maestro website.
• For details on connecting this product to iDatalink Maestro, refer to the Quick start guide.
• You can also check the device number on the [Firmware Information] screen of this product
(page 82).
Starting procedure
1
Connect the iDatalink Maestro adaptor to this product.
For details, refer to the Quick start guide.
2
Touch then swipe left on the screen.
3
Touch then
4
Touch [Input/Output settings].
5
Touch [AV Input].
6
Confirm that [Maestro] is selected.
7
Touch then swipe left on the screen.
8
Touch [Car Sources] or [Car Features].
The menu screen you touched appears.
NOTE
The iDatalink function is available only when the input signal is received by the iDatalink Maestro
adaptor.
.
- 70 -