Idatalink - Pioneer DMH-ZF8550BT Operation Manual

Rds av receiver
Hide thumbs Also See for DMH-ZF8550BT:
Table of Contents

Advertisement

iDatalink™

(Available in Australia and New Zealand)
Using iDatalink
You can access the satellite radio source provided for the vehicle. The vehicle
information and many OEM systems such as steering wheel controls, warning chimes,
driver safety systems, and etc. can be displayed on this product by connecting the
optional iDatalink adaptor. It is also possible to add visual screens such as gauges,
vehicle information, climate control, and parking assist. However, an extra interface
module is required to access these features.
NOTE
Since the type of module varies depending on the vehicle model, search for your vehicle via the
following URL to determine which features are available for each module. Remember to select the
correct radio model for accurate results.
https://www.idatalinkmaestro.com/en
Important
• For details about vehicle models that are compatible with the iDatalink adaptor, refer to the
information on our website.
• After installing the iDatalink adaptor, be sure to check that it operates properly.
• Functions and displays vary depending on the vehicle model. For details on the functions available
for each model, refer to the information on our website.
• For troubleshooting information about iDatalink functions, visit the following website:
https://www.idatalinkmaestro.com/en/support/faq
Limitations
• The data is transmitted to this product from your vehicle system via the connected
iDatalink adaptor. Therefore, the actual data contents displayed on your product may
differ from the contents on the screen described in this manual.
• When information on your vehicle or on the devices in your vehicle is sent from the
iDatalink Maestro™ module, a screen notifying you of such information may pop up.
TIP
The operating buttons, text information, etc. overlaid on the camera view screen may not appear
immediately after turning on the ignition switch.
Activating iDatalink Maestro
Before using and/or connecting the iDatalink Maestro adaptor, you will need to first flash
the Maestro RR module with the appropriate vehicle and head unit firmware.
- 69 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents