Pioneer DMH-ZF8550BT Operation Manual page 40

Menu Item
[Local]
[Off]
FM: [Level1] [Level2] [Level3] [Level4]
AM/MW/LW: [Level1] [Level2]
[FM Step]*1
[100kHz] [50kHz]
[AM Step]*1
[9kHz] [10kHz]
[Regional]*2
[On] [Off]
[Alternative FREQ]*2
[On] [Off]
[Auto PI]*1
[On] [Off]
[ALARM Interrupt]*2
[On] [Off]
[TA Interrupt]*2
[On] [Off]
[NEWS Interrupt]*2
[On] [Off]
Description
Local seek tuning allows you to only tune into
radio stations with sufficiently strong signals.
NOTES
• The FM [Level4] (AM/MW/LW [Level2]) setting allows
reception of only stations with the strongest signals.
• This setting is available only when [Radio] is
selected as the source.
• The MW and LW settings are available only when
[Russia] is selected in [Location Setting] (page 78).
You can switch the seek tuning step for the FM
band, and the seek/manual tuning step for the
AM band.
NOTES
• For the FM band, the manual tuning step is fixed to
50 kHz.
• [AM Step] is available only when [Australia] or
[Other] is selected in [Location Setting] (page 78).
Switches whether the area code is checked
during the Auto PI search.
Allow the unit to retune to a different frequency
providing the same station.
Searches for the same PI (Programme
Identification) code broadcast station from all
frequency bands automatically when the
broadcasting station contains RDS data.
NOTE
Even if you set to [Off], the PI search is automatically
performed when the tuner cannot get a good
reception.
The alarm broadcast can be received from the
last selected frequency, interrupting the other
sources.
NOTE
This setting is available only when [Australia] or
[Other] is selected in [Location Setting] (page 78).
Receives the traffic announcement from the last
selected frequency, interrupting the other
sources.
Interrupt the currently selected source with
news programmes.
- 40 -