National Instruments NI R Series Getting Started Manual page 8

Connector Type
Multifunction
Connector 0
(RMIO)
Analog Output
Connector 2
(RAO)
Digital Connector
1 (RDIO)
The SCB-68A DIP switches must be set for Direct Feedthrough mode for use
Note
with R Series devices. Visit
more information on the SCB-68A accessory.
NI is not liable for connections that exceed any of the maximum ratings of
Note
input or output signals on the NI PXIe-7867R and on the computer chassis. Refer to
the NI PXIe-7867R Specifications, available at
and output ratings for each signal.
Table 1. Recommended Cables and Accessories
Connector Block
SCB-68A Noise
Rejecting, Shielded I/O
Connector Block
(782536-01)
SCB-68 HSDIO
Shielded 68-Pin
Connector Block for
Reconfigurable DIO &
HSDIO Products
(782914-01)
ni.com/info
• SHC68-68-RMIO Shielded Cable for the
Reconfigurable MIO Connector, 68 pin
D-Type to 68 pin VHDCI, 1m
(189588-01)
• SHC68-68-RMIO Shielded Cable for the
Reconfigurable MIO Connector, 68 pin
D-Type to 68 pin VHDCI, 2m
(189588-02)
• SHC68-C68-RDIO2 Shielded High
Speed Digital Cable for the
Reconfigurable DIO Connector, 1m
(156166-01)
• SHC68-C68-RDIO2 Shielded High
Speed Digital Cable for the
Reconfigurable DIO Connector, 2m
(156166-02)
and enter the Info Code
ni.com/info
NI PXIe-7867R Getting Started Guide
Cables
scb68acables
for the maximum input
| © National Instruments | 7
for