GETTING STARTED GUIDE NI PXIe-7867R R Series Reconfigurable I/O Module (AI, AO, DIO) for PXI Express, 6 AI, 18 AO, 48 DIO, 1 MS/s AIO, 512 MB DRAM, Kintex-7 160T FPGA This document describes how to begin using the NI PXIe-7867R. Safety Guidelines Do not operate the NI PXIe-7867R in a manner not specified in this Caution...
protection built into the product if the product is damaged in any way. If the product is damaged, return it to NI for repair. This icon denotes a caution, which advises you to consult documentation Caution where this symbol is marked. Electromagnetic Compatibility Guidelines This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications.
LabVIEW 2017 or later LabVIEW Real-Time Module 2017 or later LabVIEW FPGA Module 2017 or later NI R Series Multifunction RIO Device Drivers July 2017 or later Visit ni.com/info and enter the Info Code...
Page 6
Verifying Hardware Installation for Host Targets You can verify that the system recognizes the NI PXIe-7867R by using Measurement & Automation Explorer (MAX). Launch MAX by navigating to Start»All Programs»National Instruments»MAX or by clicking the MAX desktop icon. Expand Devices and Interfaces.
Page 7
Verifying Hardware Installation for Remote Targets You can verify that the system recognizes the NI PXIe-7867R by using Measurement & Automation Explorer (MAX). Launch MAX on the host computer. Expand Remote Targets in the configuration tree and locate your system. Install LabVIEW Real-Time Module 2017 and NI RIO Device Drivers July 2017 or later on your Remote Target.
SOFTWARE NI PXIe-7867R Specifications Configuring a Project NI-RIO Help ni.com/manuals Learn LabVIEW Basics NI PXIe-7867R User Manual ni.com/gettingstarted ni.com/manuals NI R Series Examples PXI Express Controller Documentation NI Example Finder ni.com/manuals PXI Express Chassis Documentation ni.com/manuals SUPPORT Software Support Support ni.com/info>swsupport...
Page 13
For patents covering NI products/technology, refer to the appropriate location: Help»Patents in your patents.txt ni.com/patents software, the file on your media, or the National Instruments Patent Notice at . You can find information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer ni.com/legal/export-compliance...