Scientific Atlanta WebSTAR EPR2320 User Manual page 47

WebSTAR DPR2320 and EPR2320 Gateway Cable Modems User's Guide
46
Configuring IP Address Filters
Use the Setup Advanced Settings – IP Filtering page to configure IP address
filters. These filters block a range of IP addresses from accessing the Internet.
If you are not familiar with the advanced settings detailed in this section,
contact your cable service provider before you attempt to change any of the
gateway cable modem default advanced IP filtering settings.
Click IP Filtering in the Advanced Settings section of the Setup page to access
the Setup Advanced Settings – IP Filtering page.
Setup Advanced Settings – IP Filtering Page Example
The following illustration is an example of the Setup Advanced Settings – IP
Filtering page.
Setup Advanced Settings – IP Filtering Page Description
Use this page to specify and enable a range of IP addresses that cannot have
access to the Internet. Click Apply to apply and save your new IP address filter
settings.