Scientific Atlanta WebSTAR EPR2320 User Manual page 40

How Do I Configure the Gateway Cable Modems?
Configuring the Default Settings
You can use the default settings, or, if your system requires different settings to
operate correctly, you can change the default settings using the Setup Basic
Settings – Network Configuration page.
If you are not familiar with the network configuration procedures detailed in
this section, contact your cable service provider before you attempt to change
any of the gateway cable modem default network configuration settings.
Click Network Configuration in the Basic Settings section of the Setup page to
access the Setup Basic Settings – Network Configuration page.
Setup Basic Settings – Network Configuration Page Example
The following illustration is an example of the Setup Basic Settings – Network
Configuration page.
39