Baumatic BFD66SL User Manual page 28

Intensive indicator neon flashes
o The machine has sensed water in the base.
Check that the outlet hose is not kinked or crushed.
Check that there are no blockages in the drain hose or the drainage
system that the appliance is connected to.
The drain pipe may be placed in too high a position or incorrectly.
Check the installation instructions and ensure that the installation is
correct.
Intensive and normal indicator neons flash
o Short circuit
Thermistor
Call Baumatic Customer Care.
Intensive, normal and eco indicator neons flash
o Open circuit
Thermistor
Call Baumatic Customer Care.
IMPORTANT: If any other combination of the program
indicator neons flash, you should not attempt to clear it
yourself and contact the Baumatic Service Department.
IF THE FAULT CODE REAPPEARS AFTER FOLLOWING
THE ABOVE ADVICE AND CLEARING THE FAULT
CODE. YOU SHOULD TURN OFF THE APPLIANCE;
DISCONNECT THE APPLIANCE FROM YOUR MAINS
SUPPLY. THEN ARRANGE FOR AN ENGINEER TO
ATTEND THE APPLIANCE. YOU SHOULD CONTACT
BAUMATIC CUSTOMER CARE ON TELEPHONE
NUMBER (0118) 933 6911.
IF AN ENGINEER ATTENDS DURING THE GUARANTEE
PERIOD AND FINDS THAT A FAULT HAS BEEN
CAUSED BY AN ITEM ON THE ERROR CODE LIST,
WHICH COULD HAVE BEEN CLEARED BY THE
CUSTOMER. THEN YOU MAY BE LIABLE FOR THE
COST OF THE SERVICE C
28
ALL.