Setting A Wash Program - Baumatic BFD66SL User Manual

Setting a wash program

Make sure that the before first use section has been
followed.
o Check whether the appliance needs rinse aid or salt adding to it.
o Pull out the top and bottom baskets, then load them in
accordance with the loading instructions.
o Push the top and bottom baskets fully back into position.
o Add detergent
o Close the door firmly, so that you hear the door lock click shut.
o Turn the appliance on by using the ON/OFF button.
o IMPORTANT: Wait for 5 seconds before pressing the
program selection button, otherwise the appliance may
not function correctly.
o Press the program selection button to choose an appropriate
wash program for the load that you are washing. The program
indicator neons will show you which wash program you have
currently selected.
o Press the Start/Reset button and the program indicator neon will
start to blink next to the wash program that you have selected.
o After a few seconds, you will hear the appliance begin to fill with
water and the wash program will have started.
o IMPORTANT: If you open the door of the dishwasher whilst a
wash program is in progress, the machine will pause
automatically. After closing the door of the dishwasher, press the
Start/pause button. The wash program will recommence after 10
seconds.
21