Cancelling The Program; End Of Program - Beko 600872CH User Manual

Program Selection button is changed.
When Program Selection button is turned
and function buttons are pressed, the
letters "CL" flashes on the screen.
• The child lock has to be deactivated to
be able to start a new program after the
current program is finished or to be able
to interfere with the program.
To Deactivate The Child Lock:
• Press and hold the child lock button for 3
seconds.
• Child lock deactivates when the dryer
is turned off and on by the
Cancel
button.
5.11 Changing the program after it is
started
You can change the program you selected to
dry your laundry with a different program after
the machine starts running.
• For example, to select Extra Dry instead
of Iron Dry, pause the program by
pressing the Start / Stand-by button.
• Select the Extra Dry program using the
Program Selection button.
• Press the Start/Stand-by button to start
the program.
Adding and removing clothes during
stand-by
• If you want to add or remove clothes
to/from the machine after the drying
program starts:
• Press the Start/Stand-by button to put
the machine in Stand-by state. The drying
operation stops.
• Open the loading door while in Stand-
by state, and close the door after you
remove or add laundry.
• Press the Start/Stand-by button to start
the program.
Dryer / User Manual
• Adding laundry after the drying operation
• Adding or removing laundry during drying
• If a new program is selected by turning the
On/Off/
• Do not touch the inner surface of the drum

5.12 Cancelling the program

If you want to cancel the program and
• The inside of the machine shall be

5.13 End of program

When the program ends, the Fibre Filter
Cleaning and Water Tank warning symbols
on the program observation indicator turn on.
Loading door may be opened and machine
becomes ready for another run.
To turn off the machine, press the On/Off/
Cancel button.
C
NOTE
starts may cause the dried laundry inside
the machine to mix with wet laundry and
leave the laundry damp at the end of
operation.
may be repeated as many times as you
wish. But this operation continuously
interrupts the drying operation, and thus
increases program duration and energy
consumption. So, it is recommended to
add laundry before the program starts.
program selection knob while the machine
is in stand-by; the running program
terminates and new program information is
displayed on the screen.
WARNING!
while adding or removing clothes during a
continuing program. The drum surface is
hot.
terminate the drying operation for any
reason after the machine starts running,
On/Off/Cancel
keep the
pressed for 3 seconds.
A
WARNING!
extremely hot when you cancel the
program during machine operation, so run
the ventilation program to allow it to cool
down.
button
45