Table of Contents
Advertisement
When Auto Slow Shutter is Off (initial setting)
AGC
ICR
MAX
GAIN
ICR ON
Dark
ICR OFF ON
When Auto Slow Shutter is On
Note
When in Auto_ICR_OFF state and WB data is added (default), a
malfunction may occur when the subjects largely consisting of blue
and green colors are taken.
Visibility Enhancer (VE)
Using the Visibility Enhancer function will make the
darker part of a camera image brighter as well as
automatically correct brightness and contrast to show
bright parts clearly without overexposure.
Defog mode
When the surrounding area of the subject is foggy and
low contrast, the defog mode will make the subject
appear clearer by emphasizing the contrast
automatically.
Note
In the defog function, the low contrast is considered to be fog and
corrected. Therefore, when a subject such as flat wall is shot, it is
falsely recognized as fog, and the contrast may be emphasized
unnaturally.
Shutter 1/60 sec
IRIS
OPEN
IRIS
SHUTTER
Bright
Camera ID
The ID can be set up to 65,536 (0000 to FFFF). As this
will be memorized in the nonvolatile memory inside,
data will be saved regardless of whether it has been
backed up.
Effect
It consists of the following functions.
N eg. Art: Negative/Positive Reversal
B lack White: Monochrome Image
Others
E-FLIP
This function turns the video output from the camera
upside down.
Mirror Image
This function reverses the video output from the
camera horizontally.
Freeze
This function captures an image in the field memory of
the camera so that this image can be output
continuously.
Because communication inside the camera is based on V cycle, the
captured image is always the one 3V to 4V after the sending of a
Command. Thus, you can not specify a time period after sending
EVEN, ODD or a Command.
Memory (Position preset)
Using the position preset function, 6 sets of camera
shooting conditions can be stored and recalled.
This function allows you to achieve the desired status
instantly, even without adjusting the following items
each time.
Z oom Position
D igital Zoom On/Off
F ocus Auto/Manual
F ocus Position
A E Mode
S hutter control parameters
B right Control
I ris control parameters
G ain control parameters
E xposure Compensation On/Off
E xposure Level
B acklight Compensation On/Off
S low Shutter Auto/Manual
W hite Balance Mode
Basic Functions
1
Advertisement
Table of Contents
