Table of Contents
Advertisement
About White Balance modes
Display (mode)
ATW (Auto
Tracking White
Balance)
LOCK
(ATW Lock)
P3200K
(P3200K)
P5600K
(P5600K)
VAR (VAR)
Ach (Ach)
Bch (Bch)
≥ To return to ATW (Auto Tracking White Balance), perform one of the following operations:
j Touch
.
WB
MANUAL
j Press the USER button assigned as <WHITE BAL>.
j Set the iA/MANUAL/FOCUS switch to iA to switch to Intelligent Auto Mode.
≥ You can perform the same operation as step 2 with the USER button assigned as <WHITE BAL>.
This function is registered to the USER2 button by default.
≥ It is not possible to change the white balance mode in the following situations:
j When [SCENE MODE] is set to [Beach]/[Sunset]/[Fireworks]
j During Freeze Frame
To set ATW Lock
You can set ATW Lock by registering <ATW LOCK> to a USER button.
≥ Please refer to page
1
Set the White Balance mode to [ATW].
≥ Touch the operation icon
2
Press the USER button to which <ATW LOCK> is registered or touch the
applicable USER button icon to switch to [LOCK].
≥ To cancel ATW Lock, press the USER button or touch the USER button icon again. Canceling
ATW Lock will return the White Balance mode back to [ATW].
≥ ATW Lock is not available except when the White Balance mode is set to [ATW].
≥ It will be canceled when the unit is turned off.
It will automatically adjust in accordance with the recording condition.
It will lock the setting for ATW.
Preset value for studio/indoor recording (halogen lamp, etc.)
Preset value for outdoors
Setting can be finely adjusted in accordance to the recording conditions.
(l
58)
Setting in accordance to the recording scenes can be set.
Setting in accordance to the recording scenes can be set.
(l
72)
66
for details about setting the USER button.
when using a mode other than [ATW].
WB
MANUAL
Settings
(l
(l
56)
- 57 -
(l
58)
(l
58)
114)
Advertisement
Table of Contents
