Table of Contents
Advertisement
[PEAKING LEVEL]
You can set the peaking strength for Focus Assist.
≥ This function's default setting is "0".
[AREA MODE]
You can set an Area Mode effect.
[INH]/[FOCUS]/[IRIS]/[Y GET]/[FOCUS/IRIS]/[FOCUS/Y GET]
[ZEBRA MODE]
This sets the display duration of the zebra display.
[CONTINUE]:
Displays the zebra display until it is switched to another zebra display setting.
[MOMENT]:
Displays the zebra display for approximately 5 seconds.
[BARS TYPE]
You can switch the type of color bars to be displayed when you press the BARS button.
[TYPE 1]
[SUB REC BUTTON]
Enable/disable of the sub recording start/stop button on the handle can be switched.
[INHIBIT]/[ACTIVE]
[SUB ZOOM]
Enable/disable of the sub zoom lever on the handle can be switched. Zoom speed will be different
depending on the setting.
[OFF]/[1]/[2]/[3]/[4]/[5]/[6]/[7]
≥ The larger the value is, the faster the zoom speed becomes, and vice versa.
(l
(l
73)
[TYPE 2]
- 124 -
51)
(l
83)
[TYPE 3]
Advertisement
Table of Contents
