4. Align the screw hole on the solid-state drive thermal bracket with the peg on the system board.
5. Replace the screw (M2x2) that secures the solid-state drive thermal bracket and the solid-state drive 1 to the system board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Removing the solid-state drive 2
Prerequisites
1. Follow the procedure in
CAUTION:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
CAUTION:
To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.
2. Remove the
base
cover.
About this task
The following image indicates the location of the solid-state drive 2 and provides a visual representation of the removal
procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
23