Table of Contents
Advertisement
Setting SNMP [SNMP]
Click the [SNMP] tab on the "Network setup" page.
Settings relating to the SNMP function can be configured on this page. Use the SNMP manager to check the
status of the camera.
When using the SNMP function, check the details to be set with the network administrator.
(1)
(2)
(3)
(4)
No.
Item
(1)
[Community name]
(2)
[Camera title]
(3)
[Camera location]
(4)
[Contact (Destination
address or phone number
of manager)]
Enter the community name to be monitored.
Number of characters for the community name: 0 to 32
Important
• When no community name is entered, the SNMP function will not
work. Be sure to enter a community name to use the SNMP function.
Enter a camera title to be used to manage the camera with the SNMP
function.
Number of characters for the camera title: 0 to 32
Enter the name of the location where the camera is installed.
Number of characters for the camera location: 0 to 32
Enter the mail address or the phone number of the SNMP manager.
Number of characters for "Contact": 0 to 255
56
Description
Advertisement
Table of Contents
