Configure The Alarm Settings; Settings For Alarm Detection [Alarm] - Panasonic i-PRO WV-NW484SE Setup Manual

Configure the Alarm Settings

The settings relating to alarm operation at alarm detection, alarm images, VMD area, and alarm notification
can be configured on the "Alarm setup" page.
The "Alarm setup" page has three tabs: the [Alarm] tab, [VMD area] tab and the [Notification] tab.

Settings for alarm detection [Alarm]

Click the [Alarm] tab on the "Alarm setup" page.
At this point, configure the settings for the alarm.
(1)
(2)
(3)
(4)
(5)
■ Alarm setup
No. Item
(1) [Terminal alarm]
Default: OFF
ON
OFF
(2) [VMD alarm]
Default: OFF
ON
OFF
Select whether or not to receive terminal alarm input.
Terminal alarm input is received.
Terminal alarm input is not received.
Set whether or not to operate the VMD alarm.
For further information on setting the VMD area, see page 40.
Important
• When set to ON, the refresh interval of MPEG-4 images and JPEG
(QVGA) images is a maximum of 15 fps.
Alarm operation is performed.
Alarm operation is not performed.
34
Description
(1/2)