Setting The Vmd Area [Vmd Area] - Panasonic i-PRO WV-NW484SE Setup Manual

Setting the VMD area [VMD area]

Click the [VMD area] tab on the "Alarm setup" page.
The areas for detecting motion of objects using the motion detector function can be configured on this page.
Four VMD areas can be set to preset positions that are distinguished by a different outline colour. When
motion is detected in the set area, the alarm operation will be performed.
(1)
(2)
(3)
No. Item
(1) [All areas] button
(2) [Area]
[Status]
[Delete] button
(3) [Detection sensitivity]
Default: Middle
Select all areas for VMD area excluding the time and date display area.
Select four VMD areas for each outline colour.
1 (white)/2 (blue)/3 (green)/4 (red)
Select "ON" or "OFF" for the motion detector function for each outline
colour.
Deletes a preset VMD area.
Select "High/Middle/Low" as the sensitivity for detecting a change in the
VMD area.
40
Description