Advertisement
4. Insert the supplied 4 Anchors into the 4 holes on the ceiling / wall.
5. Screw the Camera Base to the ceiling / wall using the supplied 4
Screws.
a. If you want to wire the cables from the side cut of the Camera
Base, run the cables through the Camera Base first, attach and
then screw the Camera Base to the ceiling / wall.
b. If you want to wire the cables through the wall, attach and then
screw the Camera Base to the ceiling / wall. Attach the Camera
Body to the Camera Base.
6. Connect the camera to the 12V DC power source using the supplied
Power Adapter Pigtail or a power adapter.
7. Connect the camera to a DVR or a portable monitor using the
Video‐Out cable for viewing the camera view while adjusting camera
angles.
8. Screw back the Outer Housing and adjust the camera angle
simultaneously.
9. Screw back the Set Screw using the supplied Hexagon Wrench.
5
EBD331e
Advertisement
