Page 2
CAUTIONS 1. Do not install the camera near electric or magnetic fields. 2. Never disassemble the camera beyond the recommendations in this manual nor introduce materials other than those recommended herein. 3. Try to avoid facing the camera toward the sun. 4.
Page 3
The EBD431e comes with 36 IR LEDs, supporting up to 20m (~65ft.) IR distance in night vision. The removable IR cut filter allows the camera to provide True Day/Night function. The camera can work in both indoor and outdoor environments. The IP66‐rating and vandal proof housing make it suitable for outdoor use. Model Name Scanning System EBD431e/N NTSC EBD431e/P PAL Note: The models vary among countries. Please visit EverFocus regional Websites for detailed ordering information. FEATURES 3‐Axis, Sony 1/3” 960H CCD Sensor, 700 TVL resolution Sony Effio‐E platform to provide advanced camera functions Varifocal lens f=2.8~10.5mm 36 IR LEDs reach up to 20m (~65ft.) IR distance True Day/Night with removable IR cut filter Easy‐to‐use external 5‐axis joystick controller for OSD menu settings Supports double glass D‐WDR function based on Sony’s ATR technology DNR function that reduces image noise to save storage space High sensitivity, low smear, high anti‐blooming and high S/N ratio for ...
EBD431e PACKAGE CONTENTS 1. EBD431e camera x 1 2. Mounting Template x 1 3. User Manual x 1 4. Accessory kit x 1 (4 Screws, 4 Anchors, 5. Power Adapter Pigtail x 1 1 Adjustment Screw, 1 Hexagon Wrench) CABLE DEFINITIONS Cable Name Description Connects to the 12V DC power source. You can Power Cable optionally use the supplied Power Adapter Pigtail or a power adapter. Video‐Out Cable Connects to a DVR or a portable monitor for adjusting (BNC) camera angles. Connects one end to the Power Cable, and the other Power Adapter end to the 12V DC power source (black wire to ground Pigtail end; black / white wire to positive end. DIMENSIONS 119 mm / 4.69 in...
EBD431e 2. SPECIFICATIONS Pickup Device 1/3" SONY 960H CCD Video Format NTSC or PAL (depends on model selected) Picture Elements 1020 x 508 (NTSC), 1020 x 596 (PAL) Horizontal Resolution 700 TVL Sensitivity 0.01 Lux / F=1.2; 0 Lux IR On S/N Ratio Over 50dB (AGC off) Electronic Shutter 1/50 (1/60) ~ 1/100,000 sec. Video Output BNC 1.0 Vp‐p ,75ohm Gamma Correction 0.45 Lens Type Varifocal Lens f=2.8~10.5mm / F=1.2 Auto Gain Control Yes White Balance Auto Sync. Mode Internal Sync. True Day/Night Yes, True Day/Night auto switch DNR Yes D‐WDR Auto (Sony ATR) IR LED 36 Units IR LED ...
Page 6
EBD431e 3. INSTALLATION & OPERATION 1. Unscrew the Set Screw using the supplied Hexagon Wrench and then remove the Outer Housing from the Camera Base. 2. Paste the supplied mounting template onto a desired location on the ceiling / wall. Drill the four small holes for screwing the camera with the supplied Screws and Anchors, and the circle in the middle only if you wish to run the wires into the wall. 3. Insert the supplied 4 Anchors into the 4 holes on the ceiling / wall. 4. Screw the Camera Base to the ceiling / wall using the supplied 4 Screws. a. If you want to wire the cables from the side cut of the Camera Base, run the cables through the Camera Base first, attach and then screw the Camera Base to the ceiling / wall. ...
Page 7
EBD431e b. If you want to wire the cables through the wall, attach and then screw the Camera Base to the ceiling / wall. Attach the Camera Body to the Camera Base. 5. Connect the camera to the 12V DC power source using the supplied Power Adapter Pigtail or a power adapter. 6. Connect the camera to a DVR or a portable monitor using the Video‐Out cable for viewing the camera view while adjusting camera focus, zoom and angles. 7. Screw back the Outer Housing and adjust the camera angle simultaneously. 8. Adjust camera focus / zoom using the supplied Adjustment Screw. 9. Screw back the Set Screw using the supplied Hexagon Wrench. ...
EBD431e 4. Configuration in the OSD Menu You can use the external 5‐Axis OSD Joystick controller to configure camera settings in the OSD menu. OSD Joystick Push the Joystick up / down to select between menu items. OSD Joystick Push the Joystick left / right to adjust the level of the selected item. Press the Joystick to enter the submenu or exit the OSD Setup Menu. OSD Setup Menu OSD Setup Menu page 1 OSD Setup Menu page 2 LENS AUTO↲ DAY/ NIGHT AUTO* OFF SHUTTER/ AGC AUTO↲ PRIVACY OFF WHITE BAL MOTION DET ATW BACKLIGHT OFF CAMERA ID OFF ATR OFF ...
Page 9
EBD431e 4.2.1 LENS MAUNAL: No adjustment (Read Only). AUTO TYPE:DC AUTO MODE:AUTO/ OPEN /CLOSE SPEED:000~255 MODE: AUTO: Camera automatically controls the lens. OPEN: Lens fully open. CLOSE: Lens fully closed. SPEED: Speed of the lens. 4.2.2 SHUTTER/AGC AUTO ...
EBD431e 4.2.3 WHITE BAL ATW (Auto White Balance) SPEED:000~255 DELAY CNT:000~255 ATW FRAME:x0.50、x1.00、x1.50、x2.00 ENVIRONMENT:INDOOR、OUTDOOR SPEED: ATW Speed DELAY CNT: ATW Delay Time ATW FRAME: ATW Frame Range Setup ENVIRONMENT: ATW Environment Range Setup PUSH The function will keep on detecting the Color Temperature, and then keeps saving up the parameter to the camera.
Page 11
EBD431e 4.2.4 BACKLIGHT OFF: Disable the Backlight function. BLC: Enable the function of Back Light Compensation, using BLC Smart detection method. HLC: Enable the function of High Light Compensation. Note: Please avoid enabling the ATR and Backlight functions simultaneously. 4.2.5 ATR (Adaptive Tone Reproduction) OFF: Disable the ATR function.
Page 12
EBD431e 4.2.8 NEXT Enter to the next page. 4.2.9 EXIT Exit the OSD Setup Menu. 4.2.10 SAVE ALL After configuring the camera settings, press the Joystick to save all settings. 4.2.11 DAY/NIGHT AUTO BURST:ON/OFF DELAY CNT:000~255 AUTO DAY NIGHT:000~255 NIGHT ...
Page 13
EBD431e BURST: Selects whether to output the burst signal. IR OPTIMIZER: The IR Optimizer function makes it possible to minimize this overexposure by optimizing the exposure control during Night operations. MODE: Set the IR OPTIMIZER operating mode. LEVEL: Adjusts the reference level of the IR Optimizer (Default: 5). EXT1 ...
EBD431e MOSAIC: Set the mask frame mosaic function to ON or OFF. Note: When the MONITOR AREA has been set to ON by the MOTION DET setting, only 4 PRIVACY AREA SEL are selectable (1/4, 2/4, 3/4, 4/4). 4.2.13 MOTION DET DETECT SENSE 000~127 BLOCK DISP...