NordicTrack T 6.5 S User Manual page 11

8. If there are four screws (F) preattached inside
the Right and Left Handrails (84, 85), remove
and discard the screws.
IMPORTANT: To avoid damaging the Pulse
Crossbar (23), do not use power tools and do
not overtighten the #10 x 1" Screws (9).
Orient the Pulse Crossbar (23) as shown. Attach
the Pulse Crossbar to the Handrails (84, 85)
with four #10 x 1" Screws (9) and four #10 Star
Washers (5); start all four Screws, and then
tighten them.
9. With the help of a second person, hold the con-
sole assembly (G) near the Right Handrail (84)
and the Left Handrail (not shown).
Connect the ground wires (H) from the console
assembly (G) to the Console Ground Wire (58)
on the Pulse Crossbar (23).
Next, connect the Upright Wire (81) to the
console wire (I). The connectors should slide
together easily and snap into place with an
audible click. If they do not, turn one con-
nector and try again.
Then, remove the wire tie (A) from the Upright
Wire (81).
8
9
5
85
F
9
G
I
81
84
A
11
23
9
5
F
84
H
58
23