Servo Driver Vcii Series/Vph Series Manufactured By Nikki Denso Co., Ltd - Mitsubishi Electric MELSEC iQ-FX5 User Manual

Servo driver VCII series/VPH series manufactured by Nikki Denso
Co., Ltd.
The direct drive DISC/iD roll/Servo compass/Linear stage, etc. manufactured by Nikki Denso Co., Ltd. can be controlled
by connecting with the servo driver VC series/VPH series manufactured by the same company using SSCNET/H.
Contact to Nikki Denso overseas sales office for details of VC series/VPH series.
Connecting method
■System configuration
The system configuration using VC series/VPH series is shown below.
Simple Motion module
■Parameter setting
To connect VC series/VPH series, set the following parameters.
n: Axis No.-1
Setting item Setting value
[Pr.100] Servo 96: VC series (manufactured by Nikki Denso Co., Ltd.)
series 99: VPH series (manufactured by Nikki Denso Co., Ltd.)
Parameters set in VC series/VPH series are not controlled by the Simple Motion module.
APPENDICES
630
Appendix 2 Compatible Devices with SSCNETIII(/H)
Servo driver
VC ´ series/
VPH series
µ
SSCNET /H
µ
SSCNET cable
MR-J3BUS_M(-A/-B)
Servo amplifier
MR-J4(W)-B
FX5-40SSC-S: Up to 4 axes
FX5-80SSC-S: Up to 8 axes
Default value Buffer memory address
0 28400+100n