Input Label; Power Management Settings - Panasonic TH-75EQ1W Operating Instructions Manual

■
[Wobbling]
Automatically shifts the display image to prevent image
retention on the liquid crystal panel.
Setting this to [On] moves the screen position at certain
intervals and displays the images.
Note
●
If [Multi display setting] is set to [On], this function
does not operate. (see page 62)
●
When this function is operating, part of the screen
may appear to be missing.

Input label

This function can change the label of the Input signal to
be displayed.
[Input label] - submenu screen
Input label
HDMI1 HDMI1
HDMI2 HDMI2
DVI-D
PC
VIDEO VIDEO
[HDMI1]
[HDMI1] / [DVD1] / [DVD2] /
[DVD3] / [Blu-ray1] / [Blu-ray2] /
[Blu-ray3] / [CATV] / [VCR] /
[STB] / (Skip)
[HDMI2] [HDMI2] / [DVD1] / [DVD2] /
[DVD3] / [Blu-ray1] / [Blu-ray2] /
[Blu-ray3] / [CATV] / [VCR] /
[STB] / (Skip)
[DVI-D] [DVI-D] / [DVD1] / [DVD2] /
[DVD3] / [Blu-ray1] / [Blu-ray2] /
[Blu-ray3] / [CATV] / [VCR] /
[STB] / (Skip)
[PC]* [PC] / [DVD1] / [DVD2] /
[DVD3] / [Blu-ray1] / [Blu-ray2] /
[Blu-ray3] / [CATV] / [VCR] /
[STB] / (Skip)
[VIDEO] [VIDEO] / [DVD1] / [DVD2] /
[DVD3] / [Blu-ray1] / [Blu-ray2] /
[Blu-ray3] / [CATV] / [VCR] /
[STB] / (Skip)
(Skip): When <INPUT> is pressed, the input will be
skipped.
*: [PC] may be displayed as [PC[YP
the settings of [PC input mode]. (see page 75)
DVI-D
PC
P ]] depending on
B R

Power management settings

Set each item to reduce power consumption.
This function works only for the input terminal that is
currently selected.
[Power management settings] - submenu screen
Power management settings
Power management mode
No signal power off
HDMI1 power management
HDMI2 power management
DVI-D power management
PC power management
Power save
Extended standby mode
Input detection
Changing delay
■
[Power management mode]: [On]
The following fixed values are set to the menu of
power consumption reduction. Individual setting is not
available.
[No signal power off]: [Enable]
[HDMI1 power management]: [On]
[HDMI2 power management]: [On]
[DVI-D power management]: [On]
[PC power management]: [On]
[Power save]: [On]
■
[Power management mode]: [Custom]
The menu of the power consumption reduction is
individually set. This setting is enabled when [Power
management mode] is set to [Custom].
■
[Power management mode]: [Input
detection]
Sets the power consumption reduction menu
individually.
This is enabled when [Power management mode]
is set to [Input detection]. This mode interlocks
between the power management operation and the
input detection function for operation. When this
mode detects the change from without-signal state to
with-signal state by monitoring input signals, the input
signal detection function operates, and an input is
automatically switched to the input. Also, if the current
input signal disappears, it is automatically switched
to another input. If all the input signals disappear,
the power management function operates, and
automatically turns the power off/on. This operation is
performed between selected terminals.
Note
●
Set the "Power management" function to [On] for
terminals to operate this function.
●
[Extended standby mode] is set to [On], and greyed
out.
Custom
Disable
Off
Off
Off
Off
Off
Off
Off
English
57