LG A9T Series Owner's Manual page 44

MAINTENANCE
44
• Do not wash the rotating brush and the
nozzle with water or immerse them in water.
• Wrap the handle of the cleaning brush with
a wet towel or cloth and use it to clean the
rotating brush and nozzle.
5
Remove foreign objects, debris and hair from
all Rollers of the nozzles using tweezers.
6
You can clean the inside of the small roller by
inserting a flat-head screwdriver into the
groove and removing the fixing part.
7
Reassemble the small roller and the fixing part
and make sure that they are properly attached.
8
When holding both ends of the rotating brush
and pulling it out, the rotating brush and part
of the edge will separate. If hair is wrapped
around the edge of the rotating brush, remove
the rotating brush and clean it.
9
Reassemble the rotating brush and the part of
the edge and insert the end of the rotating
brush into the groove at the end of the nozzle.
10
Slide the brush back into the nozzle until it
clicks into place.