LG A9T Series Owner's Manual page 24

OPERATION
24
Alarm and LED by Steam Mop Nozzle Condition
When using the steam mop nozzle, check the operation status through the alarm and LED for each
condition.
Nozzle Front LED
Off
On
Blinking
On
On
On
Battery Pocket LED
Off
Off
On
On
Blinking
Blinking
Condition
Vacuum cleaner
power off
Operating normal
mop mode
Preheating in the
steam mode is in
progress.
Preheating is
completed and
steam operation is
in progress.
The steam mode is
in use.
There is no water in
the water tank.
The steam mode is
in use.
Low battery in the
battery pocket
Alarm and LED by Condition
The nozzle front LED of the
steam mop nozzle is on and the
battery pocket LED turns off.
The nozzle front LED of the
steam mop nozzle is on and the
battery pocket LED turns off.
The nozzle front LED blinks with
the preheating start alarm and
the battery pocket LED is on.
With the preheating completion
alarm, the nozzle front LED and
the battery pocket LED are on.
An alarm will briefly chime and
the battery pocket red LED will
flash continuously for one
minute before the steam mop
nozzle turns off.
• When using the normal mop
mode, the battery pocket LED
does not blink even if there is
no water in the water tank.
An alarm will briefly chime and
the red LED on the battery
pocket will continue to flash
until the battery is flat. The red
LED on the battery pocket will
then turn off and the steam
mode will no longer be working
but the normal mop mode will
continue to operate.