Deactivating Or Activating The Easy-Start Feature - Philips sonicare Flexcare+ HX6922 Manual

Sensitive
Gentle cleaning for sensitive gums and teeth (2 minutes).
Massage
Gentle gum stimulation (2 minutes).
Note: When Philips Sonicare is used in clinical studies, the default 2-minute
Clean mode must be selected. The handle has to be fully charged. Deactivate
the Easy-start feature. For areas where excess staining occurs, an additional
30 seconds of brushing time can be spent to help remove stains.
Features
Easy-start
This Philips Sonicare type comes with the Easy-start feature activated.
The Easy-start feature gently increases power over the first 14 brushings
to help you get used to brushing with the Philips Sonicare.
Note: Each of the first 14 brushings must be at least 1 minute in length to
properly move through the Easy-start ramp-up cycle.

Deactivating or activating the Easy-start feature

1 Attach your brush head to the handle.
2 Place the handle on the plugged-in charger.
- To deactivate Easy-start:
Press and hold the power on/off button for 2 seconds. You hear 1 beep
to indicate that the Easy-start feature has been deactivated.
- To activate Easy-start:
Press and hold the power on/off button for 2 seconds. You hear 2 beeps
to indicate that the Easy-start feature has been activated.
Note: Using the Easy-start feature beyond the initial ramp-up period is not
recommended and reduces Philips Sonicare's effectiveness in removing
plaque.
Smartimer
The Smartimer indicates that your brushing cycle is complete when
it automatically switches off the toothbrush at the end of the brushing cycle.
Dentists recommend brushing at least 2 minutes twice a day.
35_021_4216_1_DFU-SImple_A6_v5.indd 11
ENGLISH
11
24/11/17 13:32