Activating Or Deactivating The Easy-Start Feature - Philips Sonicare HealthyWhite HX6762/35 User Manual

12
English
Features
Easy-start
This Philips Sonicare comes with the Easy-start feature activated.
The Easy-start feature gently increases the power over the first
14 brushings to help you get used to the brushing with the Philips
Sonicare.
Note: Each of the first 14 brushings must be at least 1 minute in length
to properly advance through the Easy-start ramp-up cycle.
Note: When the Clean and White mode is selected, the Easy-start
feature is inactive.

Activating or deactivating the Easy-start feature

1 Attach the brush head to the handle.
2 Place the handle in the plugged-in charger.
To activate Easy-start:
Press and hold the power on/off and mode button for 2 seconds.
You hear 2 beeps and the battery level indicator lights up green to
indicate that the Easy-start feature has been activated.
To deactivate Easy-start:
Press and hold the power on/off and mode button for 2 seconds.
You hear 1 beep and the battery level indicator lights up yellow to
indicate that the Easy-start feature has been deactivated.
Note: Using the Easy-start feature beyond the initial ramp-up period
is not recommended and reduces Philips Sonicare effectiveness in
removing plaque.
Smartimer
The Smartimer indicates that your brushing cycle is complete by
automatically turning off the toothbrush at the end of the brushing cycle.
Dental professionals recommend brushing no less than 2 minutes
twice a day.
If you want to pause or stop brushing during the 2-minute brushing
cycle, press and hold the on/off button for 2 seconds. Press the
on/off button again and the Smartimer picks up where you left off.