Philips Sonicare HX6160 Service Manual

Philips Consumer Lifestyle
Service Manual
SERVICE POLICY
Product will be serviced for 3 years after End of Life.
PRODUCT INFORMATION
Easy-start
This Sonicare model comes with the Easy-start feature activated.
The Easy-start feature gently increases power over the first 14
brushings to ease into the Sonicare experience..
Easy-start can also be switched off.
To deactivate Easy-start:
Press and hold the power on/off button for 2 seconds. You hear 1
beep to indicate that the Easy-start feature has been deactivated.
To activate Easy-start:
Press and hold the power on/off button for 2 seconds. You hear 2
beeps to indicate that the Easy-start feature has been activated.
Published by Philips Consumer Lifestyle
4235-057-56101 _ 12-08-15
(YY_MM_DD)
HX6160, Sanitizer
HX6921, FlexCare+ (low end)
HX6942,FlexCare+ Pro Trial
HX6950, (handle, FlexCare+)
HX6972, FlexCare+ Retail with Sanitizer
HX6992, FlexCare+ ProDispense with Sanitizer
HX6993, FlexCare+ProDispense
Smartimer
The Smartimer indicates that your brushing cycle is complete
when it automatically turns off the toothbrush at the end of the
brushing cycle. Dental professionals recommend brushing at
least 2 minutes twice a day.
Quadpacer
The Quadpacer feature ensures that you brush all four sections of
your mouth evenly and thoroughly. You will hear a short beep and
notice a brief pause in brushing action. This is the signal to move
to the next section of your mouth. The Quadpacer feature on this
model has been activated. To deactivate or reactivate the
Quadpacer features:
Place the handle with a brush head attached on the plugged-in
charger. Press and hold the mode button for 2 seconds.
You hear 1 beep to indicate the Quadpacer has been deactivated or
you hear 2 beeps to indicate the Quadpacer has been activated.
Printed in the Netherlands © Copyright Reserved
Sonicare toothbrush
Subject to modification