Insert The Battery Pack - Sony PlayStation Portable Quick Reference

02
Preparation
Preparing the PSP
Charging the battery
Before using the PSP
purchase, you must follow these steps to charge the
battery.
Caution
• The socket-outlet shall be installed near the equipment
and shall be easily accessible.
• Do not plug the AC power cord for the PSP
an electrical outlet until you have made all other
connections.
Notices
• Do not use the PSP
the battery pack is not inserted in the system. If the AC
adaptor is disconnected suddenly, it may result in
damage to the system.
• Before inserting the battery pack, find the serial and
model numbers listed within the battery compartment
and make a record of the numbers for future reference.
6
system for use
®
system for the first time after
®
system into
®
system with the AC adaptor when
®
1

Insert the battery pack.

While holding down the push button, slide the battery
cover in the direction of the arrow. Align the bottom
surface of the battery pack with the system to attach the
battery.
1
2
Align the tabs, and then slide the cover in the direction of
the arrow until it locks firmly into place.
4
3
UMD
UMD