Flame Rod - Rheem IKONIC RTGH-S11i Training And Service Manual

HOW TO REMOVE COMPONENTS

3.3 FLAME ROD

1. Remove the hook film part of the Over Heat Limiter
(OHL ). DO NOT cut the film.
2. Remove flame rod wire from the rod.
3. Remove 3 screws from flame rod bracket, and pull
the flame rod.
Flame Rod
Igniter Rod
69
IKONIC Tankless Water Heater Service Manual
NOTE: When reassembling flame rod, please
use a spare gasket if the condition of the gas-
ket is not good.
The spare gasket is located at lower left in
the unit.