Viewing Active Alarms - Rheem IKONIC RTGH-S11i Training And Service Manual

GENERAL INFORMATION

1.7.1 VIEWING ACTIVE ALARMS

This water heater can display up to 4 active alarms.
Users may clear these alarms on the user interface by
completing the following steps.
Confirming the current alarms (up to 4 alarms)
1. Press the " SERVICE " button
SET POINT
BACK
SETTINGS
2. Press the "▼" or "▲" button until "Current Alarms "
is displayed, and press "ENTER" to confirm.
Current Alarms
BACK
SETTINGS
3. Press the "▼" or "▲" button and the LCD displays
current alarm 1 to 4.
CLEARING THE CURRENT
ALARMS
1. Redo from above step.2, and press the "▼" or "▲"
button until "Clear Alarms?" is displayed. Press "
"ENTER" to confirm.
Clear Alarms?
BACK
SETTINGS
ENTER
STATUS SERVICE MODE
ENTER
STATUS SERVICE MODE
SET POINT
BACK ENTER
SETTINGS STATUS SERVICE MODE
ENTER
STATUS SERVICE MODE
33 IKONIC Tankless Water Heater Service Manual
2. Press the "▼" or "▲" button until "Yes" is dis-
played, and press the "ENTER" To exit this setting,
press "BACK" until the initial screen is displayed.
1.7.2 ALARM HISTORY AND
CLEAR HISTORY
This water heater can display up to 6 previously ob-
served alarms. Users may clear these alarms on the
user interface by completing the following steps:
Confirming the previously observed alarms
(up to 6 alarms)
1. Press the " SERVICE " button.
Clear Alarms?
BACK
SETTINGS
2. Press the "▼" or "▲" button until "Current Alarms "
is displayed. Press "ENTER" to confirm.
3. Press the "▼" or "▲" button, the LCD displays pre-
viously observed alarm 1 to 6.
SET POINT
BACK ENTER
SETTINGS STATUS SERVICE MODE
Yes
BACK ENTER
SETTINGS STATUS SERVICE MODE
ENTER
STATUS SERVICE MODE
SET POINT
BACK ENTER
SETTINGS STATUS SERVICE MODE
Current Alarms
BACK ENTER
SETTINGS STATUS SERVICE MODE