Rheem IKONIC RTGH-S11i Training And Service Manual page 24

IKONIC Tankless Water Heater Service Manual
GENERAL INFORMATION
1.6.1 SETTING THE SET POINT TEMPERATURE
1. Press the " SETTINGS " button.
SET POINT
BACK
SETTINGS
SET POINT
SET POINT
Press button
to access
BACK
BACK ENTER
SETTINGS
SETTINGS STATUS SERVICE MODE
"SETTINGS"
Menus
2. Scroll thru the menu to select " SET POINT ", to
enter the set point mode press " ENTER " button,
which is the right most button.
120 °F
BACK
120 °F SETTINGS
BACK ENTER
SETTINGS STATUS SERVICE MODE
BACK
SETTINGS
SET POINT
BACK
SETTINGS STATUS
ENTER
STATUS SERVICE MODE
SET POINT
ENTER
BACK
STATUS SERVICE MODE
SETTINGS STATUS
120 °F
BACK
SETTINGS STATUS
ENTER
STATUS SERVICE MODE 120 °F
BACK
SETTINGS STATUS
115 °F
ENTER
STATUS SERVICE MODE
24
ENTER
SERVICE MODE
3. Now press the " ▼ " or " ▲ " button in the center
of the display to increase or decrease the tempera-
ture. Temperature can be changed in increments of
SET POINT
1°F.
BACK
SETTINGS STATUS
ENTER
SERVICE MODE
ENTER
SERVICE MODE
4. Once temperature is set to the desired value, press
" ENTER " button, right most button to store value.
To exit this setting, press BACK " button until the
initial screen is displayed.
120 °F
BACK
SETTINGS STATUS
ENTER
SERVICE MODE
SET POINT
BACK ENTER
SETTINGS STATUS SERVICE MODE
ENTER
SERVICE MODE
SET POINT
BACK ENTER
SETTINGS STATUS SERVICE MODE
120 °F
BACK ENTER
SETTINGS STATUS SERVICE MODE
Center buttons
ENTER
SERVICE MODE 115 °F
BACK ENTER
SETTINGS STATUS SERVICE MODE
BA
SET
SET POINT
BACK
SETTINGS STATUS SERVICE
B
SE
115 °F
BACK
SETTINGS STATUS SERVICE