Table of Contents
Advertisement
Figure 9. Remove the right SSD
Screw specifications
M2.0 × L3.0
Notes: For LCD panel with the factory color calibration feature, do the following to install new color
profiles:
1. Go to
https://pcsupport.lenovo.com/us/en/downloads/DS543953
software. Double-click the EXE file and follow the on-screen instructions to finish the
installation.
2. X-RiteColorAssistant.exe will auto run. Click Restore Profile button from prompted window to
restore the profile from Lenovo cloud.
Go to
https://support.lenovo.com/partslookup
replacement part:
SSD
Remove the thermal module
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
Step 1.
Disconnect the battery pack cable from the system board. Peel back the tape. Then, disconnect
the thermal module connectors from the system board.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Number of screws
1
to look up the Lenovo part numbers of the following
to download the installation
.
Chapter 4
Removing a FRU or CRU
33
Advertisement
Table of Contents
