Remove the touchpad bracket
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
Step 1.
Disconnect the battery pack cable from the system board. Remove two screws in alphabetical
order and then remove the touchpad bracket.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Figure 12. Remove the touchpad bracket
Screw specifications
M2.0 × L3.0
Go to
https://support.lenovo.com/partslookup
replacement part:
Touchpad bracket
Remove the Wi-Fi card
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
Step 1.
Disconnect the battery pack cable from the system board. Then, remove the Wi-Fi card mylar.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Number of screws
2
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
35