Figure 5. Remove the DC-in bracket
Screw specifications
M2.0 × L3.0
Go to
https://support.lenovo.com/partslookup
replacement part:
DC-in bracket
Remove the memory shielding and memory modules
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
Step 1.
Disconnect the battery pack cable from the system board. Peel off the tape. Then, remove the
memory shielding.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
30
Lenovo Legion Slim 5i (16", 8) and Lenovo Legion Slim 5 (16", 8) Hardware Maintenance Manual
Number of screws
1
to look up the Lenovo part numbers of the following