Using The Timer As A Minute Minder; Setting The Timer To Turn One Cooking Zone Off - Hoover HI642TTC/1 Instruction Manual

1 2
Power level
8 8
Default working timer
(hour)
When the pot is removed, the induction hob can stop heating immediately and the
hob automatically switch off after 2 minutes.
People with a heart pace maker should consult with their doctor before
using this unit.
Using the Timer
You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any
cooking zone off when the set time is up.
• You can set it to turn one cooking zone off after the set time is up.
• You can set the timer up to 99 minutes.

Using the Timer as a Minute Minder

If you are not selecting any cooking zone
1. Make sure the cooktop is turned on.
Note: you can use the minute minder even if you're not selecting any cooking
zone.
2. Touch timer control , The minder indicator
will start flashing and "00" will show in the
timer display.
3. Set the time by touching the "-" or "+" contro
Hint: Touch the "-" or "+"control once to decrease or increase by 1 minute.
Hold the "-" or "+" control of the timer to decrease or increase by 10
minutes.
4. Cancel the time by touching the timer control and the"00" will show in the
minute display.
3 4 5 6 7 8 9
8 4 4 4 2 2 2
l
EN-17
II
5.When the time is set, it will begin to count down
2
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
6. Buzzer will bips for 30 seconds and the timer
indicator shows "- - " when the setting time
finished.

Setting the timer to turn one cooking zone off

Cooking zones set for this feature will:
1. Touching the heating zone selection control
that you want to set the timer for. (e.g. zone 1#)
2. Touch timer control , The minder indicator
will start flashing and "00" will show in the
timer display.
3. Set the time by touching the "-" or "+" control
Hint: Touch the "-" or "+" control once will decrease or increase by 1 minute.
Touch and hold the "-" or "+" control, the timer will decrease or increase
by 10 minutes.
If the setting time exceeds 99 minutes, the timer will automatically
return to 0 minute.
4. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
5.
To cancel the timer, touch the heating zone selection control, and then touch
the timer control, the timer is cancelled, and the "00" will show in the minute
display, and then "--".
.
EN-18