Table of Contents
Advertisement
Available languages
Available languages
Auto Shutdown Protection
Auto shut down is a safety protection function for your induction hob. It shut down
automatically if ever you forget to turn off your cooking. The default working times
for various power levels are shown in the below table:
1
2
Power level
8
8
Default working timer
(hour)
When the pot is removed, the induction hob can stop heating immediately and the
hob automatically switch off after 2 minutes.
People with a heart pace maker should consult with their doctor before
using this unit.
Using the Timer
You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any
cooking zone off when the set time is up.
• You can set it to turn one cooking zone off after the set time is up.
• You can set the timer up to 99 minutes
Using the Timer as a Minute Minder
If you are not selecting any cooking zone
1. Make sure the cooktop is turned on.
Note: you can use the minute minder even if you're not selecting any cooking
zone.
2. Touch "-' or "+" of the timer control, the minder indicator will
start flashing and "00" will show in the timer display.
3. Set the time by touching the "-" or "+" control
Hint: Touch the "-" or "+" control once to decrease or increase by 1 minute.
Hold the "-" or "+" control of the timer to decrease or increase by 10
minutes.
If the setting time exceeds 99 minutes, the timer will automatically return to 0
minute.
4. Cancel the time by touching the "-" of timer and scrolling down to "0".
3
4
5
6
7
8
9
8
4
4
4
2
2
2
,
EN-17
A
II
5. When the time is set, it will begin to count down immediately.
2
2
The display will show the remaining time and the timer indicator
will flash for 5 seconds.
6. Buzzer will bips for 30 seconds and the timer indicator
shows "- - " when the setting time finished.
Setting the timer to turn one cooking zone off
Cooking zones set for this feature will:
1.
Touching the slider of the heating zone that you want to
set the timer for.
2. Touch "-' or "+" of the timer control, the minder indicator
will start flashing and "00" will show in the timer display.
3. Set the time by touching the "-" or "+" control.
Hint: Touch the "-" or "+" control once will decrease or increase by 1 minute.
Touch and hold the "-" or "+" control, the timer will decrease or increase by 10
minutes.
If the setting time exceeds 99 minutes, the timer will automatically return to 0
minute.
4. To cancel the timer, touch the slider of the selection control, and then touch the
'-' or '+'of "Timer", the timer is cancelled, and the "00" will show in the minute
display, and then "--".
EN-18
Advertisement
Table of Contents
