Table of Contents
Advertisement
6. Click the [Levels] tab.
If the microphone input is muted, click the icon " " on
the right side of the slider to cancel mute " ".
7. Press the PTT switch of the transceiver connected to the
PC and adjust the microphone level while talking with a
normal voice level.
Make the waveform as large as possible while the wave-
form displayed on the waveform monitor does not exceed
the dotted line or the peak of the waveform does not col-
lapse.
8. 【This setting is necessary only when using the FT5D,
FT3D or FT2D transceiver】
Click the [Listen] tab and check "Listen to this device".
Depending on the computer, there may be a no
[Listen] tab. In that case, proceed to step 9 as it is.
9. Press the [OK] button several times to close all Windows
setting screens.
The microphone input level adjustment of the personal com-
puter is completed with the above.
Continue to adjust the speaker output level of the personal
computer.
61
Advertisement
Table of Contents
