Part Identification Chart - Weslo WLTL29816C.1 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify small parts used for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see whether
it is preattached. Extra parts may be included.
#10 x 1" Tek
M4.2 x 19mm M5 x 16mm
M8 x 15mm
Screw (3)–4 Screw (6)–2
Screw (7)–2
Screw (2)–6
M8 Star
M5 Star
M10 x 65mm Screw (1)–4
Washer (36)–6
Washer (35)–2
7