PART IDENTIFICATION CHART
Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw-
ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key
number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see if it is preat-
tached. If it is not, call 1-866-699-3756. Extra parts may be included.
M5 Star
M8 Star
M10 Star
M10 Nut (73)–4
Washer (7)–2
1/4" Flat Washer
Washer (5)–6
Washer (9)–4
(101)–4
M4.2 x 18mm
M4.2 x 19mm
M5 x 16mm
M8 x 15mm
Screw (58)–2
Screw (10)–4
Screw (85)–2
Bolt (8)–6
1/4" x 3 1/2" Screw (103)–4
M10 x 58mm Bolt (2)–4
6