Siemens SIMATIC NET SCALANCE XC-200 Operating Instructions Manual page 18

Description of the device
3.1 Product overview
Factory settings
EtherNet/IP variants
● Industrial Ethernet protocol: Ethernet/IP
● Base Bridge mode: 802.1Q VLAN Bridge
● Redundancy mechanism: RSTP
● Trust mode: Trust CoS-DSCP
● IGMP Snooping/IGMP Querier: On
● IPv4 Address Collision Detection: Attempt to defend
PROFINET variants
● Industrial Ethernet protocol: PROFINET
● Base Bridge mode: 802.1D transparent bridge
● Redundancy mechanism: Ring redundancy
● Trust mode: Trust CoS
● IGMP Snooping/IGMP Querier: Off
● IPv4 Address Collision Detection: Never give up
18
Device
SCALANCE XC206-2 (ST/BFOC)
•
SCALANCE XC206-2 (SC)
•
SCALANCE XC206-2SFP
•
SCALANCE XC206-2SFP G
•
SCALANCE XC206-2SFP EEC
•
SCALANCE XC206-2SFP G EEC
•
SCALANCE XC208
•
SCALANCE XC208G
•
SCALANCE XC208EEC
•
SCALANCE XC208G EEC
•
SCALANCE XC216
•
SCALANCE XC216EEC
•
SCALANCE XC224
•
Factory setting ring ports
P0.7 and P0.8
P0.1 and P0.2
Operating Instructions, 04/2018, C79000-G8976-C442-04
SCALANCE XC-200