Operating Environment; Mechanical Specifications - Siemens RUGGEDCOM M2100F Installation Manual

Chapter 5
Technical Specifications
m
Typical distance. The maximum distance is greatly dependent on factors such as cable type, the number of connectors and number of splices. Consult a Siemens
sales associates when determining maximum distances.
Gigabit Ethernet (1 Gbps) Optical Specifications
NOTE
These transceivers utilize a distributed feedback (DFB) type laser and are rated for -20 to 85 °C (-4 to
185 °F) operation only.
Connector
Mode
Type
MM LC
MM LC
SM LC
SM LC
n
All cabling is duplex type unless specified otherwise.
o
Typical.
p
All optical power numbers are listed as dBm averages.
q
Typical distance. The maximum segment length is greatly dependent on factors such as fiber quality, and the number of patches and splices. Consult a Siemens
sales associates when determining maximum segment distances.
Section 5.6

Operating Environment

The RUGGEDCOM M2100F is rated to operate under the following environmental conditions.
Ambient Operating Temperature
Ambient Storage Temperature
Ambient Relative Humidity
Maximum Altitude
r
Measured from a 30 cm (12 in) radius surrounding the center of the enclosure.
s
Non-condensing
Section 5.7

Mechanical Specifications

Weight
Ingress Protection
Enclosure
28
Cable Type
o
Tx λ (nm)
n
(µm)
50/125 850
62.5/125 850
9/125 1310
9/125 1310
r
-40 to 85°C (-40 to 185 °F)
-40 to 85°C (-40 to 185 °F)
s
5% to 95%
2000 m (6562 ft)
5.2 kg (11.5 lbs)
IP20
18 AWG Galvanized Steel
p
Tx (dBm)
Sensitivity
Minimum Maximum
-9 -2.5
-9 -2.5
-9.5 -3
-7 -3
Rx Rx
Distance
Saturation
(km)
p p
(dBm) (dBm)
-20 0
-20 0
-21 -3
-24 -3
Operating Environment
RUGGEDCOM M2100F
Installation Guide
Power
Budget
q
(dB)
0.5 11
0.5 11
10 11.5
25 17