Gauges, Indicators & Displays
7
HESD indicator
(red)
8
PGM-FI malfunction
indicator lamp (MIL)
(amber)
9
high coolant temperature
indicator (red)
20
Instruments & Controls
Lights when there is any abnormality in the HESD
(Honda Electronic Steering Damper). Should also
light for a few seconds and then go off when the
ignition switch is turned ON and the engine stop
switch is at RUN. If the indicator comes on at any
other time, reduce speed and take your motorcycle to
a Honda dealer as soon as possible (page
Lamp Check.
Lights when there is any abnormality in the PGM-FI
(Programmed Fuel Injection) system. Should also
light for a few seconds and then go off when the
ignition switch is turned ON and the engine stop
switch is at RUN. If the indicator comes on at any
other time, reduce speed and take your motorcycle to
a Honda dealer as soon as possible.
Lights when the coolant is over the specified
temperature. If the indicator comes on, pull safely to
the side of the road. See pages
instructions and cautions.
39
).
Lamp Check.
−
202
203
for
Lamp Check.