Honda CBR600RR 2009 Owner's Manual page 166

RIGHT SIDE
(1)
(4)
(1) rear axle nut
(2) drive chain lock nut
(3) drive chain adjusting bolt
(4) chain adjusting plate
(5) scale graduations
(2)
(3)
(5)
1. Place the motorcycle on its side stand
with the transmission in neutral and the
ignition switch OFF.
2. Loosen the rear axle nut ( ).
3. Loosen the drive chain lock nuts ( ) on
both sides of the swingarm.
4. Turn both drive chain adjusting bolts
( ) an equal number of turns until the 3
correct drive chain slack is obtained.
Turn the drive chain adjusting bolts
counterclockwise to tighten the chain.
Turn the drive chain adjusting bolts
clockwise and push the rear wheel
toward the front to provide more slack.
Adjust the chain slack at a point
midway between the front sprocket and
the rear wheel sprocket.
Servicing Your Honda
Drive Chain
1
2
(cont'd)
157