Honda CBR600RR 2009 Owner's Manual page 169

Drive Chain
Removal, Cleaning &
Replacement
Refer to Saf ety Precautions
Your motorcycle has an endless (riveted
master link) type chain. It should only be
removed or replaced by your Honda dealer.
The O-rings can be damaged by steam
cleaning, high pressure washers, and
certain solvents.
160
Servicing Your Honda
on page 76 .
1. Clean the side surfaces of the chain
with a dry cloth. Use a high flashpoint
solvent such as kerosene
gasoline.
Do not brush the rubber O-rings.
Brushing will damage them. Use of a
solvent may also damage the O-rings.
2. Inspect the drive chain for possible
wear or damage.
Replace the drive chain if it has damaged
rollers, loose fitting links, damaged
O-rings, or otherwise appears
unserviceable.
Replacement Chain:
DID525HV
or
RK525ROZ6
− not