Troubleshooting - Breville LAP308 Instruction Book

Hide thumbs Also See for LAP308:
Table of Contents

Advertisement

Troubleshooting

MINI TROUBLESHOOTING GUIDE
Before carrying out any of the following service
checks, unplug the unit from the mains.
PROBLEM
WHAT TO DO
Unit will not start.
Check that the power plug is connected to a power outlet
and the outlet is turned on.
Check that air purifier is assembled correctly.
Check that the filter is fitted correctly in place.
Insufficient air flow.
Check that the filters are clean.
Check for any obstructions in the air inlet and/or outlet.
Excessive noise.
Check for any foreign objects that may be in contact with the fan.
Check if the filter is clogged and ready for replacement.
Check that the air purifier has been assembled correctly and the
locking knob has been tightened.
Check that the unit is on a level surface.
UV-C Light not illuminating
Contact Breville service centre for UV-C light replacement.
14
NOTE
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

The smart air connect

Table of Contents