First Time Operation - Bounty Hunter HandyMan Nail Finder S3019-H Operating Manual

First Time Operation

To Operate the Detector
1) Install the Battery
a. Use a 9-volt ALKALINE battery only (battery not included)
b. Install battery with correct polarity
(align "+" on detector housing with "+" on battery)
c. The battery cover opens and closes with a coin or screwdriver
2) Set the On switch to "ON"
"ON" is the middle position
3) Set the Audio/Vibrate Switch to "AUDIO"
4) Sweep the Detector over the target area.
Detector must be IN MOTION to detect metal