First Time Operation - Bounty Hunter Guardian S3019 Operating Manual

First Time Operation

To Operate the Detector,
1) Install the Batteries
a. Use a 9-volt ALKALINE battery only (battery not included)
b. Install battery with correct polarity
(align "+" on detector housing with "+" on battery)
c. The battery cover opens and closes with a coin or screwdriver
2) Set the On switch to "ON"
"ON" is the middle position
3) Set the Silent/Audio switch to "AUDIO"
4) Sweep the Detector over the target area.
Detector must be IN MOTION to detect metal
5) Read this manual for proper training in the detection of metal objects